Symbols Used / Warnings And Safety Instructions; Transport / Storage; Function Of The Measuring System - Kübler Ants LES02 Manual De Instrucciones

Kübler Group

2.2 Symbols used / Warnings and Safety instructions

DANGER
WARNING
CAUTION
ATTENTION
NOTICE

2.3 Transport / Storage

Check the delivery immediately upon receipt for possible transport damages. If you do not
mount the device immediately, store it preferably in its transport package.
The device must be stored at a dry and dust-free location, in compliance with the technical data,
see chapter Technical Data [} 34].

2.4 Function of the Measuring System

The sensor that is mounted on the elevator car and the coded band that is tensioned in the
shaft form together the measuring system. The sensor converts a linear motion into a digital po-
sition signal. To this purpose, it evaluates the band, which is coded by two rows of holes.
BA Ants LES02 - R60073.0009 - 02
Classification:
This symbol, together with the signal word DANGER, warns against
immediately imminent threat to life and health of persons.
The non-compliance with this safety instruction will lead to death or
severe adverse health effects.
Classification:
This symbol, together with the signal word WARNING, warns against
a potential danger to life and health of persons.
The non-compliance with this safety instruction may lead to death or
severe adverse health effects.
Classification:
This symbol, together with the signal word CAUTION, warns against
a potential danger for the health of persons.
The non-compliance with this safety instruction may lead to slight or
minor adverse health effects.
Classification:
The non-compliance with the ATTENTION note may lead to material
damage.
Classification:
Additional information relating to the operation of the product, and
hints and recommendations for efficient and trouble-free operation.
2 General Information
EN - 31