Dimension Drawings; Installation Preparation - Kübler Ants LES02 Manual De Instrucciones

4 Installation

4.1.2.1 Dimension Drawings

Sensor with fastening plate
Sensor without fastening plate

4.1.3 Installation Preparation

The following preparations can be made for the installation of the measuring system:
• Tools
– Drill with metal drill bits set - sensor car fastening
– Torx bit TX15
– Allen wrench/bit SW5
– Spanner SW16
– Flat-blade screwdriver
– Torque spanner 1...40 Nm [0.74...29.5 ft-lb]
– Stripping tool
– Tin snips and diamond file if necessary
– Installation lighting, e.g. headlamp
• Material
38 - EN
9007199382977291
BA Ants LES02 - R60073.0009 - 02
Kübler Group
128234379