Remote Control Operating Range - NORAUTO Sound NS-201 BT Manual De Instrucciones

REMOTE CONTROLS

Remote control operating range

The remote control can operate within a
distance of 3~5m.
Point the top of remote control to the remote
sensor when you operate with it.
1 - Toggle the audio source
- Power on / Power off (long press)
2 - Band switch: FM1, FM2, FM3, MW1, MW2
- MP3/WMA mode – Top play (long press)
3 - Radio tune
- Track seek
4 - Play / Pause
5 - Press to enter menu mode.
6 - Buttons
[1] Button: Preset station 1.
[2] Button: Preset station 2.
[3] Button: Preset station 3.
[4] Button: Preset station 4.
[5] Button: Preset station 5.
[6] Button: Preset station 6.
7 - Volume up / down
Remote sensor
EQ
8 - Search function
9 - Scan play / Preset scan
- Auto memory store (long press)
10 - Repeat play
11 - Random play
12 - Mute the volume
13 - EQ
Replacing the lithium battery of
remote control unit.
When the range of the operation of the card
remote control becomes short or no functions
while operating. Replace the battery with a
new lithium battery. Make sure the battery
Polarity replacement is correct.
1. Pull out the battery holder while pressing
the stopper.
2. Insert the button-type battery with the
stamped(+) mark facing upward.
Insert the battery holder into the remote
control.
WARNING:
Store the battery in place where children
cannot reach. If a child accidentally
swallowed the battery, consult a doctor
immediately.
Do not recharge, short, disassemble or
heat the battery or dispose it in a fire. Doing
this may cause the battery to give off heat,
crack or start a fire.
Do not leave the battery with other metallic
materials or poke the battery with tweezers
or similar tools.
When throwing away or saving the battery,
wrap it in tape and insulate.
36
(CR 2025)