Installing The Device On The Left-Hand Side Tce - Bosch TCE 330 Manual Original

4.2.2 Installing the device on the left-hand
side TCE 230
1. Remove the filter unit from the housing;
2. Secure the support in the rear left corner of the tire
changing machine's housing using three bolts.
¶
Tightening torque: 65 N*m
i
Ensure that the bow's surfaces are accurately aligned
with the surfaces of the housing.
Fig. 8: Support (housing)
Robert Bosch GmbH
Commissioning | TCE 330-TCE 230 | 27
3. Secure the retaining panel to the support using 4
bolts.
Fig. 9: Retaining panel
4. Secure the sliding arm to the lateral holder using 4
bolts.
¶
Tightening torque: 65 N*m
Fig. 10: Sliding arm
i
Lubricate the parts to be joined before installation.
en
|
2014-10-10 1 695 102 028