Emergency Button - EdilKamin MYA Instalación Uso Y Mantenimiento

Ocultar thumbs Ver también para MYA:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
Before enabling the system, you need to load a sack of pellets into the tank and use the stove until the loaded
fuel has run out. his allows for a short system road test.
After this, the tank can be lled completely and the stove started up.
When running, at the time at which a whole 15 kg sack of pellets can be loaded, the display will show the word
"Reserve" ashing.
At this point, after having poured in a sack of pellets, you need to inform the memory that you have loaded 15 kg.
o do so, proceed as follows:
1. press the "M" key (for appro imately -4 seconds) until the word " lock" appears.
2. press the " " key until the word "Reserve" appears.
. press the "M" key until the following screen appears,
Kg remaining in tank
then use the " " key to take the gure (*) to the value equal to the Kg of pellets loaded (15 kg in the above e ample).
4. press the "M" key to con rm
5. press the key
After having completed the above procedure, after having consumed the 15 kg, the wording "Reserve" will appear
ashing at intervals. After which the operation must be repeated, from point 1 to point 5.

EMERGENCY BUTTON

If the radio control should be faulty, the basic functions can be accessed using a red emergency button on the right side of the
stove (see g. 1). ush this button once or more times to activate the required function:
1. A S O E OFF
by pressing the red button for 2 seconds this turns on.
2. A S O E ON
by pressing the red button for 2 seconds this turns off.
. A S O E ON
manual mode, by pressing the red button, you go from 1 to
4. A S O E ON
automatic mode, by pressing the red button, you go from 5
INSTRUCTIONS FOR USE
to e it.
.
to 0
.
- 36
-
Kg caricati
emergency button

Publicidad

Tabla de contenido
loading

Tabla de contenido