EdilKamin FANTASY Instalación Uso Y Mantenimiento página 33

g.
g.
P
g.
P
L
g.
g. E
INSTALLATION
hot air outlet pipes
P
P
L
front
middle
rear
- 33
HOT AIR CIRCULATION
n the installation area, the hot air is emitted through the
grill installed in the upper front portion ( g. E).
o channel the hot air in one or two adjoining rooms, the
stove is equipped with two pipes on the bac ( g. ), to
which special aluminium pipes must be connected.
and S optional are available to facilitate
air distribution (see page - - ).
t is essential to remember the importance of proper insulation
on the pipe where the hot air passes to avoid
dispersion. void curves in the pipe as much as possible.
Note: THE PIPES ON THE HOT AIR OUTLETS
MUST BE FITTE BEFORE APPLYING THE
CO ERINGS AN PRIOR TO ISASSEMBLY OF
THE UPPER CAST IRON SI E FLAN . THE
FIRST PART OF THE FLEXIBLE PIPE MUST BE
COMPLETELY RELAXE
ELIMINATE CORRUGATION. IN THIS
INTERNAL IAMETER
ENLARGE TO FA OUR ENTRANCE.
hannelled air distribution is adjustable manually by
means of the "L lever ( g. ).
o move, remove the " loc ing plates fastened with
screws ( g. - ).
nce the plates have been removed, hot air can be directed
either in the upper front panel part g. E (lever pulled
all the way bac - see g. ) or in the rear part g. F
(lever pulled all the way forward - see g. ) or half in
the upper front panel part and half in the rear part (lever
in the middle - see g. ).
Note: IF THE STO E IS NOT CHANNELLE
PLATES (P) MUST NOT BE REMO E .
g. F
-
IN SUCH A AY TO
AY THE
ILL BE SLIGHTLY
THE