Operating - Italiana Camini CLASSICA Instalación Uso Y Mantenimiento

Ocultar thumbs Ver también para CLASSICA:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
SYNOPTIC PANEL
key to set the desired environmental temperature or
to enter the menu (set ambient temp.)
key for setting the power of the stove
(set power)
on/off or confi rm/quit menu key
indicates that the chrono-thermostat has been pro-
grammed for automatic ignition at set times
MENU DESCRIPTION
• To access the menu press the
switches off).
Pressing the
key or the
menu:
M1
Set clock
M2
Set time programme
M3
Adjust vent 1
M4
(does not appear at display in this model)
M5
Language
M6
Stand-by
M7
Screw loading
M8
Stove status
M9
Technical calibrations (TAC)
MA
Type of pellets (TAC)
Mb
Quit
• To confi rm the desired menu press the
• To go back to the previous menu press the
seconds.
• To exit the menu press the
SWITCH ON/SWITCH OFF
To switch on/switch off the stove, press the
seconds.
Led on
stove on
Led fl ashing stove on or in alarm mode
Led off
stove off
INSTRUCTIONS FOR USE
key for 2 seconds (the led
key scrolls the following
key.
key for 3
key for 6 seconds.
key for 3
indicates an alarm condition
indicates the functioning of the pellet-loading motor
this indicates the functioning of the fan
indicates functioning spark plug

OPERATING

The stove has two operating modes:
- MANUAL
In MANUAL operating mode, the water temperature at which
the stove must operate is set independently from the temperatu-
re of the room in which it is installed.
To select MANUAL mode, press the
light up).
Pressing the
key will increase the temperature until the
message 'MAN' appears on the display (above 40°).
- AUTOMATIC
In AUTOMATIC mode, it is possible to set the desired tempe-
rature of the room where the stove is installed.
When the desired environmental temperature (SET ROOM
TEMPERATURE) is reached, the stove will automatically
switch to power 1 mode.
To set the desired room temperature, press
on) and the current operating temperature will be displayed,
By means of the
key or the
the temperature to the desired level.
Ventilation is always correlated to the power in use, so it can-
not be varied.
- 27
-
key (the LED will
(the LED turns
key, it is possible to vary

Publicidad

Tabla de contenido
loading

Tabla de contenido