Safety Devices - Italiana Camini CLASSICA Instalación Uso Y Mantenimiento

CHARACTERISTICS
SERIAL PORT
The stove has a serial port RS232, to which an optional on-off control device, such as an environment thermostat, can be installed
by the TAC using a special wire (code 640560).
BACKUP BATTERY
The motherboard has a backup battery (type CR 2032, 3 volts).
Failure of the battery is due to normal wear and tear (and is not a manufacturing defect).
For more information, contact the TAC which carried out the fi rst ignition.

SAFETY DEVICES

• THERMOCOUPLE:
Positioned on the smoke discharge, it measures the temperature.
According to the set parameters, it controls ignition, operation and switching off.
• DIFFERENTIAL PRESSURE SWITCH:
Positioned in the smoke-aspiration area, it is triggered in the case of a depression in the circuit (e.g. obstructed fl ue).
• SAFETY THERMOSTAT:
This intervenes if the temperature inside the stove is too high.
It blocks pellet loading causing the stove to go out.
- 21
-