You are advised to have a thorough and
careful reading of the instructions for use in
order to get the best use and satisfaction of
your DEVILLE appliance.
The fact of not respecting the fixing, the
installing and the use istructions involves the
responsibility of the person who doesn't
respect them.
THIS STOVE MUST BE INSTALLED IN
ACCORDANCE TO THE CURRENT D.T.U.
SPECIFICATIONS.
The stove must be installed by a skilled
professional.
All the local and national regulations as well
as the European standards have to be
respected when the stove is used.
The appliance mustn't be modified.
1 - DESIGNATION
The stove is in line with the essential requirements of
the directive 89/106/CEE Produits de Construction
according to the annexe ZA of the EN 13229 standard.
It is a continuous combustion heating appliance with
grate which exclusively works with wood with a semi-
closed combustion chamber and which is designed to
be fitted in a chimney to be built.
Note down the serial number written on the descriptive
plate stuck on the appliance and on the certificate of
guarantee, write it down in the following box :
Serial number
This number will be necessary to identify your appliance
when spare parts will be needed.
Appliance
is
standard
Electromagnetic Compatibility Instruction modified by
the 93/68/EEC instruction.
2 – CALORIFIC NOMINAL POWER
Nominal
Draught
Smoke output /
power
weight
8 kW
12 Pa
Nominal calorific power in continuous running : 8 kW.
•
The intermittent running needs a reload every
three quarters of an hour.
This choice of operation is to be favoured as it is
environmentally-friendly..
•
The appliance can also ensure a continuous
running when the intemittent constraints can't be
respected or when a reduced power is wanted. In
this case, the complete power can be obtained on
a period of 2 to 3 hours and a reduced speed, with
a low power can be obtained on a period of 10
hours.
to
the
89/336/EEC
Smoke
temperatures
7,31 g/s
340 ° C
•
The nominal power in the intermittent mode :
Obtained with a draught of 12 Pa, with a
wood load of 2 kg, with a split hard wood
log.
Reload every three quarters of an hour
on a bed of embers of 0,25 kg (that is 3
cm thick) with the air intake damper
opened to its maximum position.
The given power is the average power
obtained with each load of three quarters
of an hour.
•
The nominal power in the continuous mode :
Obtained with a draught of 12 Pa, with a
wood load of 5,4 kg with 2 logs of hard
wood not being split.
Reload every 2 hours on a bed of
embers of about 0,25 kg (that is 3 cms
thick) with the air intake damper to its
maximum position.
The given power is the average power
obtained with each load of 2 hours.
•
The slow combustion in the continuous mode :
Obtained with a draught of 6 Pa, with a
wood load of 9 kg with 1 log of hard
wood not being split and favouring big
diametres (over 16 cms).
Reload on a bed of embers of about 0,2
kg (that is 2,5 cm thick) in closing
completely the air intake damper.
3 - DESCRIPTION AND DIMENSIONS
3.1 - Description
The main parts of your appliance are shown and
marked out on Fig. 1.
The combustion chamber is made of steel (4mm thick),
the bottom of the hearth is lined with a cast iron back
plate.
A metal sheet casing allows a cooling air flow around
the chamber of combustion and protects the walls of
the mantelpiece from radiance : it is a guarantee of
safety and performance.
The cast iron door is fitted with seals which ensure
smoketightness and allow a large autonomy of working.
The air damper, situated at the bottom of the door The
air damper, situated at the bottom of the door allows to
choose a fire speed.
An extra air intake is built in the upper part of the
window to keep it clean and ensure a better burning of
the wood.
A two-speed blower allows to activate the hot air
circulation. This equipment allows to send a hot air flow
in four different directions (adjoining rooms). Without
shaft, it will improve the convection where your
appliance is.
Blower output : 100 m³/h
Net weight of the appliance
Gross weight (without door,
deflector, grate, back plate)
14
C07920
95 kg
63 kg