Maintenance - Fanimation Odyn FPD8148 Manual Del Propietário

How to Operate Your Ceiling Fan
5. "D" and "ON" dip switch:
For this fan, switch should be in the "ON" position, allowing
for dimming of the light. (Figure 5)
The receiver provides the following protective function:
Lock position: The DC motor has a built-in safety feature
against blade obstruction against obstruction during
operation. If something obstructs the fan blades the motor
will stop operating after 30 seconds of interruption. Please
remove obstacles and reset.
Over 80W protection: When the receiver detects motor
power consumption which is greater than 80W, the
receiver power will shutdown and fan operation will cease.
Disconnect the power supply and after 5 seconds return-
power on to the fan.
1. Periodic cleaning of your new ceiling fan is the only
maintenance that is needed. When cleaning, use
only a soft brush or lint free cloth to avoid
scratching the finish. Abrasive cleaning agents are
not required and should be avoided to prevent
damage to finish.
How to Clean Your Ceiling Fan Blades
Periodic light dusting of the blades is recommended.
A feather duster will work best.

Maintenance

Do not use water when cleaning your ceiling fan.
It could damage the motor or the finish and create
the possibility of electrical shock.
Avoid using water, cleansers, or harsh rags, which
can warp and ruin the finish.
14
(continued)
Figure 5
CAUTION