Tools Needed; Materials Needed - Gaggenau GI240760 Guía De Usario

TOOLS NEEDED

Hammer
Tape
Measure
Wire
Cutter

MATERIALS NEEDED

(Additional materials may be required to comply with local codes.)
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground, insu-
lated copper conductors.
Hot Water Supply Line - Minimum 3/8" O.D. copper tubing or metal braided
dishwasher supply line.
Shut-off valve and fittings appropriate for hot water supply line (copper
tubing/compression fitting, or braided hose).
90° elbow with 3/8" N.P.T. male threads on one leg, and sized to fit your
water supply line (copper tubing/compression fitting, or braided hose) on the
other leg.
Teflon tape or other pipe thread compound to seal plumbing connections.
UL listed conduit connector or strain relief.
2
Hole
Saw
Slot
Screwdriver
Wire
Stripper
Pipe
Wrench
Phillips
Screwdriver
Drill
Adjustable
Wrench
Torx
Screwdriver
Level