Warranty Information - Invacare Matrx ELITE E2S Manual Del Usuario

Respaldo
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
Laundering the Outer Cover:
PRIOR to laundering, the inner foam cushion must be removed from the cover).
1. Carefully remove the cover by releasing the velcro hook & loop fasteners along
the top, bottom and inside of the back shell.
2. Machine wash cover in warm water (60C) on the Gentle Cycle.
3. Drip Dry or Tumble Dry on Low Heat (Dry cover thoroughly before re-fitting foam)
NOTE: Do Not Dry Clean, Do Not Iron, Do Not Bleach
Cleaning the Back Shell/Hardware:
1. The back shell and hardware/components can be wiped clean with soap and
water as necessary.
4.3 REUSE/RECYCLING
WARNING! Risk of Injury
Always have an authorized dealer inspect the product for damage or wear PRIOR to
transferring the product to a different user. If any damage is found, DO NOT use this
product. Failure to heed these warnings may result in severe injury.
This product is suitable for re-use. The outer cover (fabric and foam), back shell
and mounting hardware must be inspected by a qualified dealer or healthcare
professional before re-use. If any damage is found, DO NOT RE-USE
Clean and disinfect all components (cover, foam, hardware and back shell) in
accordance with local government regulations, prior to re-use.
For further assistance and/or information on decontamination and disinfection,
please consult your local Infection Control Office.
4.4 DISPOSAL
The disposal and recycling of used devices and packaging must comply with the
applicable local legal regulations.
5.0 W
ARRANTY
WARRANTY
We provide a manufacturer's warranty for the product in accordance with our
General Terms and Conditions of Business in the respective countries.
Warranty claims can only be made through the provider from whom the product
was obtained.
I
NFORMATION
- 7 -
- 7 -

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Matrx elite e2d

Tabla de contenido