Medidas De Seguridad - ESAB POWERCUT 650 Manual De Instrucciones

SECCIÓN 1
1.0 Precauciones de seguridad
Los usuarios de los equipos de corte y soldadura ESAB tienen la responsabilidad de asegurar que las personas que
GB GB
trabajan o están cerca del equipo sigan las normas de seguridad.
Las precauciones de seguridad deben estar de acuerdo con equipos de corte y soldadura. Las recomendaciones
abajo deben ser seguidas adicionalmente a las normas estándar.
1. Cualquier persona que utilice un equipo de soldadura o corte plasma debe ser familiar con:
-su operación
Arc welding and cutting can be injurious to yourself and others. Take precausions when welding. Arc welding and cutting can be injurious to yourself and others. Take precausions when welding.
-localización de los paros de emergencia
Ask for your employer's safety practices which should be based on manufacturers' hazard data. Ask for your employer's safety practices which should be based on manufacturers' hazard data.
-sus funciones
ELECTRIC SHOCK - Can kill ELECTRIC SHOCK - Can kill
-precauciones de seguridad
Install and earth the welding unit in accordance with applicable standards. Install and earth the welding unit in accordance with applicable standards.
S S
-corte plasma y soldadura
Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing. Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S S
Insulate yourself from earth and the workpiece. Insulate yourself from earth and the workpiece.
S S
Ensure your working stance is safe. Ensure your working stance is safe.
S S
FUMES AND GASES - Can be dangerous to health FUMES AND GASES - Can be dangerous to health
2. El operador debe asegurar que:
Keep your head out of the fumes. Keep your head out of the fumes.
S S
-ninguna otra persona este en la área de trabajo durante el arranque de la maquina
Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
S S
-ninguna persona este sin protección al momento de la partida del arco and the general area. and the general area.
ARC RAYS - Can injure eyes and burn skin. ARC RAYS - Can injure eyes and burn skin.
Protect your eyes and body. Use the correct welding screen and filter lens and wear protective Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
S S
clothing. clothing.
3. La área de trabajo debe:
Protect bystanders with suitable screens or curtains. Protect bystanders with suitable screens or curtains.
S S
-estar de acuerdo con el trabajo
FIRE HAZARD FIRE HAZARD
-estar libre de corrientes de aire
Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby. Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
S S
NOISE - Excessive noise can damage hearing NOISE - Excessive noise can damage hearing
Protect your ears. Use earmuffs or other hearing protection. Protect your ears. Use earmuffs or other hearing protection.
S S
Warn bystanders of the risk. Warn bystanders of the risk.
S S
4. Equipo de seguridad individual:
MALFUNCTION - Call for expert assistance in the event of malfunction. MALFUNCTION - Call for expert assistance in the event of malfunction.
-siempre utilice equipos de seguridad, lentes, prendas ignífugas, guantes, etc.
Read and understand the instruction manual before installing or operating. Read and understand the instruction manual before installing or operating.
-no utilice artículos sueltos, como bufandas, pulseras, anillos, etc.
5. Precauciones generales:
-este seguro que el cable de retorno esta bien conectado
-el trabajo con alta voltaje debe ser realizado por un técnico calificado.
-un extintor de incendios apropiado debe estar acerca de la maquina.
WARNING! WARNING!
-lubricación de la maquina no debe ser realizada durante la operación.
Read and understand the instruction manual before installing Read and understand the instruction manual before installing
or operating. or operating.
CAUTION! CAUTION!
El equipo de clase A (400 V CE) no está diseñado para su uso en
Class A equipment is not intended for use in residential locations where Class A equipment is not intended for use in residential locations where
ubicaciones residenciales donde la corriente eléctrica se suministra
the electrical power is provided by the public low- -voltage supply the electrical power is provided by the public low- -voltage supply
mediante el sistema de suministro público de baja tensión. Pueden
system. There may be potential difficulties in ensuring electromagnic system. There may be potential difficulties in ensuring electromagnic
surgir posibles problemas a la hora de garantizar la compatibilidad
compatibility of class A equipment in those locations, due to conducted compatibility of class A equipment in those locations, due to conducted
electromagnética con el equipo de clase A en dichas ubicaciones,
as well as radiated disturbances. as well as radiated disturbances.
debido a las perturbaciones tanto conducidas como radioeléctricas.
Do not dispose of electrical equipment together with normal waste! Do not dispose of electrical equipment together with normal waste!
WARNING WARNING
PROTECT YOURSELF AND OTHERS! PROTECT YOURSELF AND OTHERS!
ADVERTENCIA
249

MEDIDAS DE SEGURIDAD