Output Current; Options / Accessories - Control Techniques UNIDRIVE SP1201 Guía Rápida

Safety Product Mechanical
Information Information Installation

Output current

The continuous output current ratings given on the rating label are for maximum 40°C
(104°F), 1000m altitude and 3.0 kHz switching. Derating is required for higher switching
frequencies, ambient temperatures >40°C (104°F) and higher altitude. For derating
information, refer to the Unidrive SP User Guide on the CD supplied with the drive.
Input current
The input current is affected by the supply voltage and impedance. The input current
given on the rating label is the typical input current and is stated for a balanced supply.
2.2

Options / Accessories

Figure 2-2
Internal braking
resistor (size 0
to 2 only)
External
footprint /
bookcase
EMC filter
* Part supplied with drive.
8
Electrical Getting
Menu 0
Installation Started
SMARTCARD*
SM slot 1
SM slot 2
CT Comms
cable
www.controltechniques.com
Running Advanced
the motor parameters
Keypad
SM-Keypad
SM-Keypad Plus
SM slot 3
Feedback
SM-Universal Encoder Plus
SM-Resolver
SM-Encoder Plus
Fieldbus
SM-PROFIBUS-DP
SM-DeviceNet
SM-INTERBUS
SM-CAN
SM-CANopen
SM-SERCOS
SM-Ethernet
SLM
SM-SLM
Unidrive SP Short Form Guide
UL Listing
Diagnostics Appendix
Information
15-way D-type
converter
Automation
(I/O Expansion)
SM-I/O Plus
SM-I/O Lite
SM-I/O Timer
SM-I/O PELV
SM-I/O 120V
SM-I/O 24V Protected
(Applications)
SM-Applications
SM-Applications Lite
SM-EZMotion
SM-Applications Plus
Issue Number: 2