Initial Startup; Operation - Nederman Vacuum Blaster Manual De Usuario

Ocultar thumbs Ver también para Vacuum Blaster:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65
EN
Vacuum Blaster
6.
7.
8.
4.4

Initial startup

Before operating Vacuum Blaster the first time follow all points of chapter 5. Operation
but without the use of blasting media.
5

Operation

WARNING!
The use of Vacuum Blaster is only allowed with the following:
Suitable non-bleeding positive deadman handle or remote control system.
Suitable blast hose and blast hose couplings.
Suitable nozzle.
Contact your supplier or the manufacturer for detailed information.
WARNING!
The operator(s) is to be equipped with approved:
helmet or mask
protection goggles
respiratory equipment
protective clothing
safety shoes or boots
gloves
ear protection
Also warn and/or protect people nearby the blasting process with the above items.
WARNING!
Never direct the installed blast hose and nozzle towards a person.
WARNING!
THE
sound level can reach 125 dB at the nozzle.
Warning! Risk of personal injury.
Do not use blast media containing free silica.
20
NOTE!
Make sure that the locking pin is secured.
Connect the two control hoses from an approved deadman handle or remote
control system, see see figure 9 items 9 and 10 and figure 12.
NOTE!
Make sure that all hoses are in good condition and secured in their respective
couplings. Refrain from unnecessary curves of the hoses and tension on Vacuum Blaster.
The blast hose should be laid out in a straight line or big radius curves to avoid quick wear.
Fasten the bag using the strap, see figure 13.
Inlet compressed air, see figure 1 item 11.
NOTE!
Make sure that the locking pin is secured.
Risk of personal injury.
Risk of personal injury.
Risk of personal injury.
Risk of personal injury.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido