Pressure Regulator; Compressed Air Filter; Spare Parts - Nederman Vacuum Blaster Manual De Usuario

Ocultar thumbs Ver también para Vacuum Blaster:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65
EN
Vacuum Blaster
Replace the membrane and/or rubber wear disc:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
6.2.3

Pressure regulator

See figure 5 item 3 for location of the pressure regulator.
1.
2.
3.
4.
6.2.4

Compressed air filter

See figure 5 item 4 for location of the compressed air filter.
1.
2.
3.
4.
5.
6.
7.
6.3

Spare parts

CAUTION!
Use only Nederman original spare parts and accessories.
Contact your nearest authorized distributor or Nederman for advice on technical service
or if you require help with spare parts. See also www.nederman.com.
Ordering spare parts
When ordering spare parts always state the following:
24
Remove the six internal wrenching bolts of the cover.
Replace the diaphragm and / or rubber wear disc.
Put the cover back with the six
Remove the valve from the vessel by loosening the two couplings.
Remove the four bolts at the bottom and remove the base. The top part including
the plunger can now be taken out of the body.
Take out the sleeve and check / replace it.
Take out all seals and check / replace them.
To check / clean the cylinder take out the for bolt at the top.
Remove the cap and check the parts.
Slightly grease when putting the piston back.
Remove both hoods / caps with a wrench.
The internal parts can be taken out and cleaned.
Oil all parts lightly and place them back.
Put the hoods / caps back and tighten them gently with a wrench.
Remove the bowl by removing the collar (turn it anti-clockwise).
Remove the nut on the outside of the bowl.
The automatic drain can now be removed and cleaned.
Clean the bowl.
Remove the filter element by turning the buffer plate anti-clockwise
Clean the element thoroughly with some warm water. Let dry before placing it
back.
Put the bowl, drain and element back.
Risk of equipment damage.
Part number and control number (see the product identification plate).
Detail number and name of the spare part (see www.nederman.com).
Quantity of the parts required.
bolts.Abrasive

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para Nederman Vacuum Blaster

Tabla de contenido