Controls - AKG C535 EB Modo De Empleo

dEScRIPTIoN
2.5

Controls

26
does not in any way encumber the user –mainly the vocalist – when
working with it.
The high quality condenser transducer is screwed into an elastic
suspension element. This arrangement effectively prevents hand-
ling and cable noise from being transmitted. The excellent transient
response of the microphone results from the use of extremely thin
diaphragm materials which made it possible to reduce moving
masses to about 2 milligrams. The result is brilliant, transparent,
and faithful reproduction of voices and instruments.
The sturdy steel wire-mesh front grille will take the kind of punis-
hment the microphone receives during stage work and protects
the transducer against mechanical damage. An additional foam
lining will suppress pop noise and wind noise created by wind
instruments.
The surface of the C535 EB is matte black; therefore, the micro-
phone is highly inconspicuous which is a particular advantage in
television and stage work. Strong spotlights will not cause irritating
light reflections.
The C535 EB is designed for external universal phantom powering
(9 ... 52 volts, according to IEC 61938) and may be fed from
mixers, tape recorders, battery, or mains operated power supply
units.
• Wiring: balanced, ungrounded.
• Current consumption is lower than 1 mA.
Your C535 EB carries its individual serial number.
Controls
A built-in mode switch enables you to adapt the microphone's fre-
quency response and sensitivity to a variety of recording situations.
As a safeguard against unintentional activation, the switch is reces-
sed in the microphone shaft.
C535 EB MANUAL