Servicing - AKG C535 EB Modo De Empleo

7

Servicing

Transducer replacement is simply and does not require any tools.
1) Unscrew front grille counter-clockwise; the knurled screw
base of the elastic suspension with the built-in transducer is
now visible.
2) Hold knurled screw base of elastic suspension firmly.
3) Unscrew transducer by turning brass ring of system coun-
ter-clockwise.
4) To install new transducer, follow above instructions in reverse
order.
Note:
Do not attempt to remove the elastic suspension from the micro-
phone housing while replacing the transducer.
C535 EB MANUAL
SERvIcINg
41