The NoBark 10R has a single push-button that allows you to turn the unit on
and off, display the current operating mode, and change the operating mode. The
following table describes how to perform the different tasks.
Task
Turn the collar on
Turn the collar off
Display current
operating mode
If you continue to push the button for more than 5 seconds, you will begin changing
modes (see page 6).
Push-Button Functions
Steps to perform
Press and release the push-
button while the unit is off.
Press the push-button until
the display goes blank and
the red light comes on.
Then, release the push-
button.
Press the push-button
and hold it for less than 2
seconds before releasing it.
www.sportdog.com/international
Indications
The light will fl ash
green fi ve times and
then will display the
current operating
mode as described
on previous page.
The light will fl ash
red four times and
stop operating.
The unit will
display the current
operating mode,
as described on
previous page,
and the battery
condition.
7