TV tuner
2
Press Multi-Control to turn BSSM on.
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished, the preset channel list ap-
pears.
# To cancel the storage process, press
Multi-Control.
3
Use Multi-Control to select the desired
station.
Turn to change the station; press to select.
# You can also change the station by pushing
Multi-Control up or down.
# If you do not operate the list within about 8
seconds, the preset channel list mode is can-
celled automatically.
Note
Storing broadcast stations with BSSM may re-
place broadcast stations you have saved using
P 1P12.
Selecting stations from the
preset channel list
The preset channel list lets you see the list of
preset stations and select one of them to re-
ceive.
1
Press LIST to switch to the preset chan-
nel list mode during the frequency display.
2
Use Multi-Control to select the desired
station.
Turn to change the station; press to select.
# You can also change the station by pushing
Multi-Control up or down.
# If you do not operate the list within about 8
seconds, the preset channel list mode is can-
celled automatically.
Section
10
49
En