Rewriting The Entertainment Displays; Important; Using The Pgm Button - Pioneer DEH-P80MP Manual De Instrucciones

Other Functions
Rewriting the
entertainment displays
You can rewrite the entertainment display.
Please create or download the data using your
Computer, and record it on CD-R. For details,
please visit
http://www.pioneer.co.jp/car/pclink3b/.

Important

Once the rewriting process has started, do not
open the front panel or turn the ignition off, until
it is completed.
1 Press SOURCE and hold until the unit
turns off.
2 Press and hold ENTERTAINMENT and
DISPLAY until the unit goes into download
mode.
Front panel is opened automatically and then
Download Insert disc and Download Ready
is displayed.
# If a disc is loaded in the unit, it is ejected auto-
matically.
# When the front panel is open, does not go into
download mode even if you press and hold
ENTERTAINMENT and DISPLAY.
3 Insert the disc containing the rewritten
data into the CD loading slot.
DOWNLOAD READY appears in the display,
and then data rewriting will start automati-
cally. NOW LOADING is displayed during re-
writing.
CD loading slot
4 After FINHSHED is displayed, press
EJECT to open the front panel and eject the
disc.
Download mode is exited and unit turns off.
Notes
! Do not insert anything other than a CD into
the CD loading slot.
! It can take several minutes to complete this
operation.
! During download mode, buttons other than
EJECT are inactive.
! To cancel download mode, press EJECT.
! If the rewriting process does not operate prop-
erly, an error message such as CD ERROR
may be displayed. Refer to Understanding
error message on rewriting the entertainment
displays on the next page.

Using the PGM button

You can operate the preprogrammed functions
for each source by using PGM on the remote
control.
% Press PGM to turn pause on when se-
lecting built-in CD player or multi-CD
player as the source.
# To turn pause off, press PGM again.
% Press PGM and hold to turn BSM on
when selecting tuner as the source.
Press PGM and hold until the BSM turns on.
# To cancel the storage process, press PGM
again.
% Press PGM and hold to turn BSSM on
when selecting television as the source.
Press PGM and hold until the BSSM turns on.
# To cancel the storage process, press PGM
again.
Section
14
65
En