Adjustment Of Clutch Lever; Adjusting The Throttle Play; Adjusting The Spring Preload - Beta Motorcycles RR 125 LC 2019 Manual De Instrucciones

3
ADJUSTMENT OF CLUTCH
C
LEVER
Generally, the only operation that is per-
formed on the clutch is adjustment of the
position of lever A.
To perform the adjustment, lift rubber dust
cover C and turn adjuster B.
B
The lever must have 5 mm of idle stroke.
A
In order to adjust the play of the clutch
transmission you also can operate on the
control clutch lever adjusting nut D, located
on the engine.
D
ADJUSTING THE THROTTLE
C
PLAY
Should the throttle twist grip have an idle
travel in excess of 3 mm measured on the
grip rim, adjust the play by turning rings
C as shown in the figure.
ADJUSTING THE SPRING
PRELOAD
To adjust the spring preload, use the pro-
2
cedure described below:
Looser the dovel 1.
Turn the ring nut 2 to increase or decrease
the spring preload.
Tighten the dovel 1.
1
EN
37