4
CHECK AND ADJUSTING OF
STEERING PLAY
Periodically check the play in the steering
sleeve by moving the fork back and forth
as shown in the figure. Whenever you feel
play, adjust as described below:
- Unscrew the screws 1
- Loosen nut 2
- Take up the play by means of ring nut 3
Tighten the screws to the prescribed torque
values.
20Nm
NOTE: Correct adjustment, in addition to
1
not leaving any play, should not cause diffi-
culty or irregularity in turning the handlebar.
30Nm
2
3
FRONT WHEEL
TIGHTENING
Following removal of the wheel:
Compress and release the fork 3-4 times.
EN
50