Analogue Tv: Measuring The Video Carrier Level - Promax TV EXPLORER HD+ Manual De Instrucciones

VBER
LBER
In order to change the measurement highlighted, press the
monitor will appear cyclically all the measures available for the signal on tune.

5.14.1 Analogue TV: Measuring the Video Carrier Level

In the measurement mode of analogue signals, the TV EXPLORER HD+, monitor
can work as an analogue indicator of level representing the signal present in the input.
In order to change the measurement mode press
screen like the following one:
Figure 23.- Analogue signal level measurement in terrestrial band.
Turn the rotary selector
[12] key to select the type of measurement to highlight on the monitor.
The available types of measurements are:
LEVEL:
C/N:
V/A:
Page 50
(Only for DVB-S) The BER measurement (Bit error rate) for the
digital signal after error correction (BER after Viterbi).
(Only for DVB-S2) The BER measurement (Bit error rate) for the
digital signal after error correction (BER after LDPC).
[1] to change the tuning channel/frequency. Press the
Level indication on the upper part of the screen (analogue
bar).
Carrier/Noise ratio measurement.
Video/Audio ratio measurement.
USER'S MANUAL. TV EXPLORER HD+
[12] key, it will appear a
[12] key. On the
11/2013