Viewprint Screen Function; Usb On-The-Go Function; Connection Of Tv Explorer Hd - Promax TV EXPLORER HD+ Manual De Instrucciones

To delete one or more of the captured images, press
DELETE PRINT SCREEN. You will see a list of captured screens files. To delete a file,
place on it and press the rotary selector
option and press the rotary selector
delete all the screenshots.
NOTE: You cannot use this function in the case of OSD messages.

5.21 VIEWPRINT SCREEN Function

With this function the user can see the screen that has been captured (except for
the video screenshots in TV mode) by using the PRINT SCREEN function (previous
section).
To access this function, press
there is a list of files names of the captured screens. You can move along this list of the
screen captures files by turning the rotary knob and see the image thumbnail. To zoom
in, press the rotary knob
of files.

5.22 USB On-the-Go Function

The TV EXPLORER
communication protocol called USB On-The-Go (OTG abbreviated). This type of
communication allows the equipment to work in two different ways depending on the
element connected to the USB port: as a server (host) or as a device (slave). In general,
the TV EXPLORER
slave when connecting to a computer. This function converts the PC into a much more
versatile instrument.
5.22.1 Connection of TV EXPLORER
(slave)
This option allows you to copy a certain file from the TV EXPLORER
USB flash drive or vice versa. To access these options, you should previously connect a
USB memory device (flash drive, portable hard drive, etc ...) to the mini USB female port
of the instrument. To do this use the CC-045 cable (Mini USB male - female USB)
supplied with the equipment. When the connection is working, it appears an USB icon on
the measurement screen (see picture) and the USB option becomes available on the
Utilities menu.
Page 88
[1]. Press again the rotary knob
HD+ has a female mini USB port that uses a specific
HD+ works as a host when connecting a USB flash drive and as a
USER'S MANUAL. TV EXPLORER HD+
[1]. To delete all stored files place on ALL
[1]. A window pops up asking for permission to
[22] and select VIEWPRINT SCREEN. Then
HD+ (host) to a USB flash drive
[22] and select
[1] to get back to the list
HD+ to the
11/2013