Promax TV EXPLORER HD+ Manual De Instrucciones página 216

Select the option by pressing the rotary and turn it to go from OFF to ON. Press
the rotary to accept the change. There are two new options, which are:
ASI OUTPUT SOURCE
It allows you to select the output signal between two options: DEMODULATORS
and AUXILIAR. The DEMODULATORS option uses the TS coming from the
internal demodulator, which is active at that time. The AUXILIARY option uses any
video file.
TS INPUT SOURCE
It allows selecting the TS to use in the decoder. The INTERNAL option uses the
TS coming from the internal demodulator of the instrument. The EXTERNAL
option uses the TS connected through the TS-ASI input by the user.
You can also access the TS-ASI option from the MEASUREMENT mode. Press
the key for measurement configuration
the bottom of the menu until the option ENABLE ASI INTERFACE.
Page 92
USER'S MANUAL. TV EXPLORER HD+
Figure 67.-
Figure 68.-
[17] to access the SETUP menu and go to
11/2013