Promax TV EXPLORER HD+ Manual De Instrucciones página 218

Next data box contains AUDIO information: type of audio coding (MPEG-1, MPEG,
AAC or DD), audio bit rate, audio program identifier (APID) and language (e.g. spa).
The last box located in the same column shows the NETWORK data: network
name and/or satellite orbital position, service name (if a signal comes via ASI instead of
RF, it will be also indicated), network identifier (NID), service identifier (SID) and logical
channel number (LCN) assigned (if DVB-T or DVB-T2 is selected).
On the left column appears the type of DVB signal, a window showing the signal
decoded and finally a data box stating if the emission is encrypted or free (SCRAMB or
FREE), when the service supports interactive TV (MHP, i.e. Multimedia Home Platform)
and when is inserted a CAM module into the TV EXPLORER
appears.
When pressing the cursor arrow
window again, in order to fix on screen this window the vertical cursors
be pressed up to select the OSD:OFF field, so press rotary selector
OSD:ON.
Also the standard MPEG-2 profile is indicated which determines the compression
rate for the digital service decodified, the aspect ratio (4:3), the resolution (horizontal x
vertical) for received video and the picture refreshment frequency rate. In the (OSD:OFF)
mode the information window previously described will appear whenever the rotary
selector is pressed again
When a digital channel is decodified, once the Table of Services SDT (Service
Description Table) acquisition is completed, is possible to accede to the list of
services contained in the Table.
Page 94
Figure 70.- Digital channel monitoring.
[6] key will appear the tuning information
[1].
USER'S MANUAL. TV EXPLORER HD+
HD+ the indication (CAM)
[6] key must
[1] to switch to
11/2013