Transportation, Packaging And Storage; Control Of Transportation; Packaging; Storage - Bartscher 400M Manual De Instrucciones

3. Transportation, packaging and storage

3.1 Control of transportation

As soon as the device is delivered, make sure it is complete or has not been damaged
during shipping. In case of visible damage not acknowledged or on reserve, the delivery is
considered accepted.
Write the damage on the packing list or transportation document of the carrier. Proceed
with a complaint.
Request for damage compensation can only be sent within the specified complaint terms.

3.2 Packaging

Preserve the original box the device was packed in. It could be useful to keep it in when
being moved or when the device must be sent to a repair centre if damaged. Before
using the device, remove the inside and outside packing material.
NOTICE!
If you dispose of the packaging, comply with relevant local standards.
The packaging materials are recyclable.
Please check that the device and its accessories are present and complete. If a
component is missing, contact our customer service centre.

3.3 Storage

Keep the packs sealed until it is time for installation and consider the orientation and
outside marking.
The packaging must be kept in the following conditions:
- Do not keep it outdoors.
- Keep it in a dry and dust-free place.
- Do not expose it to aggressive agents.
- Do not expose it to sunlight or heat sources.
Avoid blows and mechanical vibrations.
-
In case of prolonged storage (> 3 months), check the
-
conditions of the components and of the packaging.
If necessary, renew it or replace it.
- 37 -