Burner Grates And Components - Dacor DOP36M96GL Manual De Instrucciones

Care and maintenance - Cooktop

Burner grates and components

Turn off all surface burners and make sure they have all cooled down.
1
2
3
8
7
6
76 English
NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_EN.indd 76
1. Remove the burner grates.
2. Remove the burner caps from the
burner heads.
3. Remove the burner heads from the
valve manifolds to reveal the starter
electrodes.
4. Clean the grates and burner
components in warm, soapy water. (Do
not use steel-wool pads or abrasive
cleaners.)
5. Rinse and dry grates and burner
components thoroughly. Ensure the
burner ports are free of water.
6. Reassemble the burner heads, making
sure to insert a starter electrode
through the hole in each head.
NOTE
See page 79 for details on how to
reassemble the burner components.
7. Reassemble the remaining burner
components, making sure the caps lie
flat on top of the heads.
8. Re-install the burner grates in their
respective positions.
9. Turn on each burner to verify that
it works properly, then turn off the
burner.
2019-07-29 10:52:46