Technical Data; English - DeWalt DWS7085 Manual De Instrucciones

HEAVY-DUTY MITER SAW LED WORKLIGHT SYSTEM
DWS7085
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical data

Worklight V
DC
Power supply
Input: V
AC
Hz
Output: V
DC
A
Operating Temperature °C
Storage Temperature °C
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, may
result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
Safety Instructions for Worklights
DWS7085
3.3
220–240
50/60
3.3
0.9
0 to 40
40 to 85 The DWS7085 is for use only with D
light/laser attachment miter saws.
• Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel may result in injury.
• Do not place the worklight in a position
which may cause anyone to intentionally
or unintentionally stare into the worklight.
Serious eye injury could result.
• Do not disassemble the worklight or
worklight power supply. There are no user
serviceable parts inside.
• Do not modify the worklight in any way.
Modifying the worklight may result in risk of
injury.
• The worklight is intended for lighting the
workpiece area and is not a safety device.
• Do not remove or deface warning labels.
• Use Miter Saw Worklight System only with
specifically designated D
Saws. Use of Miter Saw Worklight System on
non-designated tools may create a risk of injury.
• Use worklight part # 641437-01 only with
worklight power supply part # 654657-01.
Use of worklight with another power supply may
create injury.
WARNING! Read and understand
all instructions. Failure to follow all
instructions listed below may result
in electric shock, fire and/or serious
personal injury.
WARNING: For your own safety, read
the tool instruction manual before using
any accessory. Failure to heed these
warnings may result in personal injury
and serious damage to the tool and the
accessory. When servicing this tool, use
only identical replace ment parts.
WARNING: To reduce the risk of eye
injury, always use eye protection
when operating the miter saw.
WALT
E
SAVE THESE INSTRUCTIONS
WALT Miter
E
EN GL IS H
11