Troubleshooting Guide; Optional Accessories; Protecting The Environment - DeWalt DWS7085 Manual De Instrucciones

WARNING:
LED RADIATION: DO NOT STARE INTO
BEAM
CLASS 2 LED PRODUCT
MAXIMUM OUTPUT POWER
P = 9.2 mW;
peak
IEC 60825-1:1993 + A1:1997 + A2:2001
NOTE: The miter saw must be connected to a
power source.
The Miter Saw Worklight System is equipped with an
ON/OFF switch (c). The Miter Saw Worklight System
is independent of the miter saw's trigger switch.
MAINTENANCE
Your D WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk
of serious personal injury, turn
tool off and disconnect tool from
power source before making any
adjustments or removing/installing
attachments or accessories.
WARNING: To reduce the risk of
serious personal injury, DO NOT
touch the sharp points on the
blade with fingers or hands while
performing any maintenance.
Cleaning
For the best worklight performance, perform the
following maintenance regularly.
• Carefully clean sawdust and debris from
worklight lens with a cotton swab.
• DO NOT use solvents of any kind, they may
damage the lens.
• Dust build-up can block the worklight and
prevent it from accurately indicating the line of
cut.
• Follow miters saw's instruction manual to
remove and install blade.
• With blade removed from saw, clean pitch
and build-up from blade. Pitch and debris can
interfere with the worklight and prevent it from
accurately indicating the line of cut.
= 456 nm

Optional Accessories

Consult your dealer for further information on the
appropriate accessories.

Protecting the environment

Should you find one day that your D
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separate collection.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D WALT provides a facility for the collection and
E
recycling of D
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.

TROUBLESHOOTING GUIDE

• The worklight does not light.
Check all connections. Refer to
Installation of Power Supply and to
Installation of Worklight.
If light is still not visible, a list of
authorised D WALT repair agents and
E
full details of our after-sales service and
contacts are available on the Internet at:
www.2helpU.com
WARNING: Since accessories, other
than those offered by D
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D WALT, recommended
E
accessories should be used with this
product.
Separate collection. This product must
not be disposed of with normal
household waste.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
WALT products once they have
E
EN GL IS H
WALT, have
E
WALT product
E
13