Maruyama MBS329 Manual Del Propietario U Operador página 2

1.Read and understand this Instruction Manual before
using the this product. Be thoroughly familiar with the
proper use of the Brushcutter.
2.Never allow children to operate the Brushcutter. it is not a
toy. Never allow adults to operate the unit without first
reading the Instruction Manual.
3.Become familiar with the controls and know how to
stop the engine quickly.
4.ALWAYS WEAR SAFETY GLASSES or other
suitable eye protection, and hearing protection.
5.Keep the area of operation clear of all persons,
particularly small children and pets.
6.Never operate the Brushcutter when you are fatigued.
Never operate without proper guards or other
protective safety devices in place.
7.Dress properly; do not wear loose clothing or jewelry.
They can be caught in moving parts. Always wear
substantial footwear, long pants, and long sleeved
shirt.
8.Gasoline is highly flammable; handle it carefully. Fill
the fuel tank with the correct mixture of gasoline and
oil before trying to start the engine.
A. Use an approved fuel container for storing the
gasoline/oil mixture.
B. Do not fill the tank when the engine is hot or running.
C. Do not smoke while handling gasoline.
D. Fill the fuel tank outdoors and up to about 10mm
from the top of the tank, not the top of the filler neck.
Model
Overall length (mm)
Dimensions Overall width (mm)
Overall height (mm)
Dry weight
Gear
Deduction ratio
Model
Type
Engine Displacement (cc)
Fuel Tank Capacity (liter / qts.)
Carburetor
Ignition
Spark plug
Spark plug gap (mm / in.)
Fuel Mixture
SAFETY INSTRUCTIONS
SPECIFICATIONS
(kg / lbs)
E. Wipe any spilled gasoline before starting the
engine.
9.Always be sure of your footing; keep a firm hold of
the handles with both hands, and walk, never run.
10.Use the right tool for the job. Do not use the
Brushcutter for any job that is not recommended
by the manufacturer.
11.Keep all fasteners tight to be sure the Brushcutter
is in safe working condition. Follow the mainte-
nance instructions provided on page US-6 to US-7
of this manual.
12.Do not put hands or feet near or under the
rotating/ moving parts. Keep clear at all times.
13.If the Brushcutter should start to vibrate
abnormally, stop the engine and check
immediately for the cause. Vibration is generally
a warning of trouble.
14.Do not trim too close to the ground in order to
avoid hitting small stones or other debris. Avoid
using the Brushcutter near rocks, gravel, stones
and similar matter.
15.Use the Brushcutter only in daylight or good
artificial light.
16.Shut off the engine and be certain the attached
tool has completely stopped rotating/moving
before inverting the machine.
MBS329
9,6/ 21,2
Spiral bevel gear
AE320
Air cooled. 2-cycle, 1-cylinder
Diaphragm Type
Soild State
NGK BPM6Y
0,6 – 0,7 / 0,024 – 0,028
USE ONLY NON - LEADED REGULAR GASOLINE.
2 - CYCLE OIL MIX 25:1 RATIO MUST BE APPROVED
FOR AIR - COOLED ENGINES.
― US-1 ―
2710
345
465
1:1,46
31,8
1,0