Specifications - Ikegami IPD-Q01 Manual De Instrucciones

11. Specifications

(1) Pickup device:
(2) Scanning system:
(3) Vertical frequency:
(4) Horizontal frequency:
(5) Sync system:
(6) Video output:
(7) S/N ratio:
(8) Minimum subject illumination: 1.0 lux/F1.4 (light source temperature 3100K, subject reflectance
(9) Automatic gain control:
(10) White balance:
(11) Backlight compensation: ON/OFF switchable
(12) AES:
(13) Electronic shutter:
(14) Auto iris function:
(15) Camera ID function:
(16) Remote setup function: Possible (remote control by client PC)
(17) Lens mount:
(18) Flange focus adjustment:
(19) Pixel size:
(20) Image compression format: JPEG2000
(21) Image quality:
(22) Frame rate:
(23) Audio:
(24) Privacy masking function: Provided (masking presettable)
(25) Motion detection function: Provided (masking presettable)
(26) Image recording function:
(27) Alarm mail function:
(28) Physical interface:
1/3-inch IT-CCD
Effective pixels 768(H) x 494(V), approx. 380,000 pixels
Color filter Color difference line sequential system
2:1 interlaced NTSC system
59.94 Hz
15.734 kHz
Internal sync, crystal lock
VBS 1.0 Vp-p/75Ω
Over 48 dB (p-p/rms)
(with luminance signal, standard illumination, DETAIL off and
weighting on)
89.9%)
ON/OFF switchable
Automatic tracking white balance
ON/OFF switchable (not usable where the power frequency and
camera vertical frequency are different)
AES range: approx. 1:1600
ON/OFF switchable
Shutter speed: 1/100
VIDEO iris/DC iris selectable
Provided (16 characters in one line, analog output only)
CS mount (C mount adaptor connectable)
Provided
720 x 480, 720 x 240
360 x 240 (120), 180 x 120 (60) with scalable delivery function
5 levels
Max. 30 fps
Frame rate control: 7 levels
ADPCM interactive
Microphone input : -60 dBV, 1kΩ unbalanced
(plug-in power type DC 8V)
Line output: -10 dBV, 600Ω unbalanced
(Interrupted depending on line conditions)
Alarm and pre-alarm (time specified)
Provided (POP before SMTP/SMTP-AUTH compatible)
Ethernet (10Base-T/100Base-TX)
E-13