NSK VarioSurg 3 Manual De Operación página 10

5-2 Connection of the Foot Control
1) Turn the Foot Control Cord Plug so that the screw faces down. Insert
the Plug so that it correctly fits into the Foot Control Connector
Socket of the Control Unit.
2) Secure the lock nut of the Foot Control Cord Plug.
5-3 Connection of the AC power cord
1) Turn the Power Switch OFF. ( side)
2) Insert the AC Power Cord so that it correctly fits into the AC Power
Cord Connector Socket at the back of the Control Unit.
3) Plug the AC power cord into a wall outlet specified for medical use.
Do not tug the AC power cord by holding and pulling its cord.
Make sure that the device has completely stopped before removing or inserting the AC power cord.
CAUTION
5-4 Connection of the Irrigation Tube
1) Turn the Pump Cover lever for the Irrigation Pump, located
at the side of the Control Unit, clockwise by 180 degrees to
open the Pump Cover.
2) After checking the irrigation direction, insert the tube into
the Irrigation Pump.
3) Align the Tube Clamps of the Irrigation Tube with the tube
guides and set the Tube.
4) Turn the Pump Cover Lever anticlockwise by 180 degrees
to close the Pump Cover.
Tube guide
Align
Pump cover
Align
Direction of Irrigation
Tube Clamp
Fig. 5
9
Lock Nut
The screw should face down.
Foot Control Cord Plug
AC power cord
<When the pump cover is open>
Pump cover lever
<When the pump cover is closed>
Fig. 2
Fig. 3
Fig. 4
Fig. 6