GB
MT
•
Do not spray combustible liquids. Risk
of explosion.
•
If you come into contact with cleaning
agents, rinse with plenty of clean wa-
ter.
•
Store the equipment in a dry place and
out of reach of children.
Caution! To avoid damage to
the equipment and any pos-
sible person injury resulting
from this:
•
Do not work with damaged or incom-
plete equipment, or with equipment
that has been converted without the
approval of the manufacturer. Before
initial operation, have a specialist
check that the required electrical pro-
tection measures are in place.
•
Do not operate the equipment if the
mains cable, water supply or other im-
portant parts such as the high-pressure
hose or gun are damaged/leaking.
•
Protect the pressure cleaner from frost
and dry running.
•
High-pressure hoses, fittings and
couplings are important for machine
safety. Use only high-pressure hoses,
fittings and couplings recommended by
the manufacturer.
•
Use only original accessories and do
not carry out conversion work on the
equipment.
•
Please read the notes in the operating
instructions on the topic of "mainte-
nance and cleaning". Any measures
above and beyond these, particularly
opening the equipment, are to be car-
ried out by an authorised electrician.
In the case of repairs, always contact
our service centre.
48
Electrical safety:
Caution: to avoid accidents
and injuries from electric
shocks:
•
The plug and socket of an extension
cable must be water-tight!
Unsuitable extension cables can
be dangerous as people can be
harmed by an electric shock!
•
Protect the electric plug connections
against moisture.
•
If there is a risk of flooding, fix the
plug connections in an area that is safe
from flooding.
•
Ensure that the mains voltage matches
the specifications on the rating plate.
•
Connection to the mains must be
carried out by an experienced electri-
cian and meet the requirements of
IEC 60364-1.
•
The electrical installation shall be ac-
cording to national wiring rules.
•
The device must only be connected to
a mains socket via a residual-current
circuit breaker (RCD) with a rated leak-
age current of not more than 30 mA.
Fuse: at least 13 ampere.
•
Before each use, check the equipment,
cable and plug for damage.
•
If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualified per-
son in order to prevent hazards.
•
Do not pull the plug from the socket by
the cable. Protect the cable from heat,
oil and sharp edges.
•
Do not carry or fix the equipment by
the cable.
•
Use only extension cables that are pro-
tected from spray water and designed
for outdoor use. Always fully unroll a