Preparation For Use; Initial; Supply Voltage; Calibration - Amprobe ACDC-400 Manual De Instrucciones

ACDC-400

3. PREPARATION FOR USE

3.1. INITIAL

This instrument has been checked mechanically and electrically before shipment. All
precautions have been taken to assure that the instrument reaches you in perfect
condition.
However, it is advisable to carry out a rapid check in order to detect any possible damage,
which might have occurred in transit.
Check the accessories contained in the packaging to make sure they are the same as
reported in paragraph 6.3.1.
In the event of re-shipment of the equipment please follow the instructions reported in
paragraph 7.

3.2. SUPPLY VOLTAGE

The instrument is battery supplied; it use two batteries model 1.5V LR03 included in
packaging. The batteries autonomy is about 25 hours.
The symbol " " appears when the batteries are nearly discharged. In this case, replace
them following the instructions in paragraph 5.2.

3.3. CALIBRATION

The tester complies with the accuracy specifications listed in this manual and such
compliance is guaranteed for one year, afterwards the tester may need recalibration.

3.4. STORAGE

In order to guarantee the accuracy of the measurements, after a period of storage in an
extreme environmental condition, wait for the apparatus returns to normal measuring
conditions (see environments specifications paragraph 6.2.1).
EN - 6