Safety; General Data; Environmental Conditions; Climatic Conditions - Amprobe ACDC-400 Manual De Instrucciones

Continuity test
Range
Activated for R<40Ω

6.1.1. Safety

Comply with:
Insulation:
Pollution:
For inside use, max height:
Over voltage:

6.1.2. General data

Mechanical characteristics
Size:
Weight (including battery):
Jaws opening:
Max conductor size:
Supply
Batteries type:
Low battery indication:
Battery life:
Display
Characteristics:
Sample rate:
Conversion mode:

6.2. ENVIRONMENTAL CONDITIONS

6.2.1. Climatic conditions

Reference temperature:
Operating temperature:
Operating humidity:
Storage temperature:
Storage humidity:

6.2.2. EMC

This apparatus was designed in accordance with EMC standards in force and its
compatibility has been tested in accordance EN61326 (1997) + A1 (1998) + A2 (2001).

6.3. ACCESSORIES

6.3.1. Standard accessories

The accessories contained inside the packaging are the following:
• Instrument.
• Test leads. (MTL-90B)
• Rubber test lead holster (MTL-CAP)
• User's manual. (www.Amprobe.com)
• Carrying case. (SV-U)
• Batteries.
Buzzer Max. Open Loop voltage
EN 61010
Class 2, double reinforced insulation
Level 2
2000m
CAT III 600V (between ground and input terminal)
205(L) x 64 (W) x 39(H)mm
about 280g
30mm
30mm
2 batteries 1.5V LR03 AAA.
Symbol "
too low.
About 25 hours.
3 ¾ LCD with maximum reading 3999 units plus
decimal point signs plus backlight
2 times/sec.
20 times/sec. for analogical bargraph
mean value
23° ± 5°C
5 ÷ 40 °C
<80% RH
-10 ÷ 60 °C
<80% RH
about 1.5VDC
" is displayed when battery level is
EN - 18
ACDC-400
Overload protection
600V rms