Maintenance; General Information; Battery Replacement; Cleaning - Amprobe ACDC-400 Manual De Instrucciones

5. MAINTENANCE

5.1. GENERAL INFORMATION

1. This digital clamp meter is a precision instrument. Whether in use or in storage, please
do not exceed the specifications to avoid any possible damage or danger during use.
2. Do not place this meter in high temperature and/or humidity or expose to direct
sunlight.
3. Be sure to turn the meter off after use. For long term storage, remove the batteries to
avoid leakage of battery fluid that can damage the internal components.

5.2. BATTERY REPLACEMENT

When LCD displays the symbol "
Only experts and trained technicians should perform this operation. Remove
the test leads or the conductor under test before replacing the batteries.
1. Set range switch to the OFF position.
2. Remove the test leads.
3. Remove the screw from the battery cover.
4. Remove the battery cover.
5. Remove the low batteries.
6. Replace them with new of then same type (1.5V AAA).
7. Replace the battery cover and screw.
8. Use the appropriate battery disposal methods for your area.

5.3. CLEANING

For cleaning the instrument use a soft dry cloth. Never use a wet cloth, solvents or water,
etc.
", replace the batteries.
WARNING
EN - 16
ACDC-400