Place Of Installation Of The Device; Connection To The General Gas Network - arilex 40FG70 Manual De Instrucciones

2.2. PLACE OF INSTALLATION OF THE DEVICE

- Take the device out of the packaging, check its integrity and place it in the place where
it will be used.
- Level it horizontally and adjust the height by manipulating the adjustable feet as indi-
cated in (Fig. 1).
- If the device is placed against a wall, it must be able to withstand temperatures up to 80
° C and if it is flammable, a thermal insulation must be applied.
- Remove the protective film by slowly peeling it off to avoid sticking remains.
Do not obstruct the openings or slots for suction or elimination of heat, and place
the device under an extraction hood, which must be installed according to current
regulations.

2.3. CONNECTION TO THE GENERAL GAS NETWORK

2.3.1. INDICACIONES PARA LA INSTALACIÓN
Installation operations, possible adaptations to other types of gas, start-up and elimina-
tion of inconveniences in the installations must only be carried out by qualified person-
nel, in accordance with the rules and regulations in force.
The gas installations, electrical connections and premises where the devices are insta-
lled must comply with the rules and regulations in force. In particular, it must be taken
into account that the air required for the burners to burn is 2 m3 / h per kW of installed
power.
The rules to prevent accidents and the fire and panic safety rules must be respected in
premises open to the public.
23