3.2. REGULATION
APPARATUS WITH MECHANICAL VALVE (FIG.7)
SWITCH OFF
PILOTE
- Open the gas tap outside the device.
- Open the device door.
- Press and hold down the pilot button
button (located behind the door in the cabinet) for approximately 20 seconds until all the
air comes out of the tube and the pilot lights up.
- When the pilot is lit, which can be checked with the device door open, the main burner
can light.
ATTENTION:
ATTENTION:
DO NOT OPERATE THE PILOT BURNER AND THE MAIN BURNER IF THERE IS NO
DO NOT OPERATE THE PILOT BURNER AND THE MAIN BURNER IF THERE IS NO
OIL IN THE TANK.
OIL IN THE TANK.
PILOT IGNITION (FIG.7)
(Fig. 7) and at the same time press the power
TEMPERATURE
REGULATION
KNOB
29