Checks To Be Carried Out Before Installation - arilex 40FG70 Manual De Instrucciones

2.3.2. CHECKS TO BE CARRIED OUT BEFORE
INSTALLATION
Check using the technical plate located inside the door or on the left side, that the device
has been tested and approved for the type of gas available to the user.
Check that the injectors mounted on the device correspond to the type of gas available.
Check with the data on the technical plate that the capacity of the pressure reducer is
sufficient to supply the device (Fig. 3).
Avoid interposition of section reducers between the reducer and the device. It is advisa-
ble to mount a gas filter before the pressure regulator to ensure proper operation.
24