Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.7 AUTO POWER OFF SETTING
It can set auto power off the crane scale, when scale not in use, scale will turn off after the setting time. If want to enable the
function,please see parameter F9 OF
•
Press
key to select the options;
•
Press
key to confirm;
•
Press
key to escape from the settings.
F9 OF
5.8 BACK LIGHT SETTING
It can set back light when scale in use.
•
key ,the display will be show bk AU;
Hold
•
Press
key to select the options;
•
Press
key to confirm;
bk AU
bk ON
bk OF
Note: If the battery gets low, the backlight function will not be available
5.9 REMOTE CONTROLLER
SMC crane scale can order remote controlled, you can find 4 keys at the remote controller. the function is same with the crane scale
except
key.
Please pull out the antenna before operate the remote controller.The remote controller operate distance is around 20m, but it's depends on
the operate environment.
The red LED must light up when any button is pressed. If it does not light up, the batteries in the remote control must be exchanged.
5.10
OVERLOAD RECORDS
•
Please do not add item that is over the maximum capacity. When reading show ---OL--- and hear beeping sound, remove the item
on the hook to avoid damage to the load cell.
•
Once overloaded , the overload records will be recorded.
32
32
Of 0
To set auto off function turn off, for scale always on
Of 5
Set to turn off 5 minutes later
Of 10
Set to turn off 10 minutes later
Of 20
Set to turn off 20 minutes later
Of 30
Set to turn off 30 minutes later
To set auto option. When start to use back light will be on and when stop the
operation back light also will off.
To set always on. After turn on the power, back light also
will be on.
To set back light turn off. No back light in the operations.
USERS GUIDE SMC
EN
EN
Publicidad
Tabla de contenido
