Resolution; Auto Power-Off Timing; Idle Timing; Display Brightness - Baxtran STA Serie Manual De Usuario

User's Guide
In system setup
resolution, automatic power-off delay, idle delay, the screen's brightness, display frequency, and anti-
motion level etc.
The screen displays the welcome message as below.
CONDITION
The scale must not be in

RESOLUTION

Technically, the
thing. The only difference is that changes made here can be saved for later, while changes at
tion switch
To learn more about Resolution, please refer to Resolution Switch in 6Advanced Operation sec-
tion.

AUTO POWER-OFF TIMING

Auto power-off
the scale when it's not working.
Auto power-off
stable. Once the timer's timing reaches the delay user set in
the scale. Any key pressing or motion in load, will restart the countdown timer.
Scale can be timed to auto power-off itself from "01" minutes to "99" minutes, or "never" when
power-off timing
The default

IDLE TIMING

To maximize its battery life, the scale automatically enters the
the load is stable. In
"01" seconds to "99" seconds can be set to scale's Idle countdown timer. Once the timer's timing rea-
ches the delay user set, it automatically lowers the brightness of the screen. If
"00", the scale never goes into
Any key pressing or motion in load, will wake up the scale from
and restart the countdown timer.
The default Idle Timing is set to "30" seconds.

DISPLAY BRIGHTNESS

Lowering the brightness of screen can also save scale's battery life.
There are optional 3 levels of brightness, "1" to "3". At level 1, the screen works at low power, while
at level 3, it works at high power.
The default

DISPLAY FREQUENCY

Display frequency
There are optional 5 levels of Display Frequency, "0" to "4". At level 4, the screen's weight reading
changes slowly, while at level 0, it changes fast.
46
mode, user can change the scale's system function to their desired state, like higher
HOLD mode. Otherwise, error message
resolution here and the
only come into effect this time, but not next time when the scale is rebooted.
function maximizes scale's battery life against people's carelessness not to power off
starts the scale's power-off
is set to "00".
auto power-off timing
idle mode, the scale works in low-power consumption status.
idle
display brightness is set to level "2".
decides how frequently the screen updates the weight reading.
resolution switch
countdown timer when there's no action or the load is
is set to "15" minutes.
mode.
will keep flashing.
above-mentioned both refer to the same
system setup, it automatically power off
idle mode, when there's no action or
idle timing
idle mode
(when it is in this mode),
STA/STR/STC
resolu-
auto
is set to