C0522 through C1030
Remote Condenser Models - Installation Manual
Options and Other Information
Optional Advanced Feature Board (KSB)
When this option is present there is an additional
display panel in the area below the main control
board. It is not visible when the front panel is on.
The Advanced Feature Board's features include:
•
Seven day programmable ice level setting
when used with the optional Ultrasonic ice
level control
•
Recording of machine operation, including
cycle time.
•
Calculation of average cycle time
•
Recall of malfunctions with the time they
occurred.
™
SmartBoard
Advanced Feature Control
See Instructions for Available Features
Ice
The cuber drops ice in large sections. That ice will
break up into random parts as it falls into the bin,
but some large sections may remain on top of the
ice in the bin. When removing ice, tap the groups of
ice with an ice scoop to separate them into smaller
units. In a dispenser, this ice will break up into
mostly individual cubes as the dispense
mechanism moves the ice.
Heat
Most heat is exhausted at the remote condenser.
The ice machine should not generate significant
heat.
Noise
34
ESC
SEL
The ice machine will make noise when it is in ice
ENTER
making mode. The compressor and water pump all
02-4293-01 Rev A.
produce some sound. It is also normal to hear
some cracking just before the harvest cycle begins.
In addition, during the harvest cycle the harvest
assist solenoid will click twice as it pushes the ice
out and returns to its normal position. The ice
harvests as a unit or slab, which makes some
noise when it impacts the bin or dispenser. These
noises are all normal for this machine.
June 2007
Page 20