Simplicity Regent Serie Manual Del Operador página 13

Ocultar thumbs Ver también para Regent Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 79
Reverse Mowing Option (RMO)
The Reverse Mowing Option allows for mowing (or use of other
PTO driven attachments) while traveling in reverse. If you
choose to mow in reverse, turn the RMO key after the PTO is
engaged. The L.E.D. light will illuminate, and the operator can
then mow in reverse. Each time the PTO is engaged the RMO
needs to be reactivated if desired.
PTO Switch
The PTO (Power Take-Off) switch engages and disengages
attachments that use the PTO. To engage the PTO, pull UP on
the switch. Push DOWN to disengage. Note that the operator
must be seated firmly in the tractor seat for the PTO to function.
Ignition Switch
The ignition switch starts and stops the engine, it has
three positions:
OFF
Stops the engine and shuts off the
electrical system.
RUN
Allows the engine to run and powers the
electrical system.
START
Cranks the engine for starting.
NOTE: Never leave the ignition switch in the RUN
position with the engine stopped–this drains the battery.
Ground Speed Pedals
The tractor's forward ground speed is controlled by the forward
ground speed control pedal. The tractor's reverse ground speed
is controlled by the reverse ground speed control pedal.
Depressing either pedal will increase ground speed. Note that
the further down the pedal is depressed, the faster the tractor
will travel.
Cruise Control
The cruise control is used to lock the ground speed control in
forward. The cruise control has five lock positions.
Features & Controls
Mower Height of Cut Adjustment
The mower cutting height adjustment lever controls the mower
cutting height. The mower cutting height can be set to one of
seven positions between 1-1/4" and 4" (3.2-10 cm).
Seat Adjustment Lever
The seat can be adjusted forward and back. Move the lever,
position the seat as desired, and release the lever to lock the
seat into position.
Transmission Release Valve Lever
The transmission release valve lever deactivates the
transmission so that the tractor can be pushed by hand. See
PUSHING THE TRACTOR BY HAND for
operational information.
Fuel Tank
To remove the cap, turn counterclockwise.
12V
Power Outlet (Select Models)
The power outlet is 12V-DC. Accessory must be rated at 9 amps
or less.
Fuel Level Gauge
Displays the fuel level in the tank.
Parking Brake
The parking brake knob is used to lock the parking brake when
the tractor is stopped. Fully depressing the brake pedal and
pulling up on the knob engages the parking brake.
Brake Pedal
Depressing the brake pedal applies the tractor brake.
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

16.5 hp2690822269083616956011695649

Tabla de contenido