SAFETY AND INFORMATION SIGNS
The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
data.
B)General hazard: read the manual
before carrying out any procedure.
C)General hazard: when washing the appliance do
not point pressurised water jets at internal parts.
D)General hazard: all relevant regulations must be
complied with. "Install in compliance with the
relevant regulations and use in well ventilated
premises only".
E)General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of
failure to comply
commissioning instructions".
F) Burn hazard: watch out for hot surfaces.
G)CE marking: indicates that the appliance is
compliant with the relevant norms.
OPTIONAL ACCESSORIES
The appliance can be equipped with the following
accessories on request (see "general catalogue").
carefully
with the installation and
G
A
- 7 -
E
D
C
IDM-39614800400.tif
F
B
IT
GB
DE
FR
ES
English