Replacing The Top Burner Pilot Light Nozzle - Angelo Po 1G0TP0 Manual De Uso E Instalación

To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Pull off the knob (A).
3 - Undo the scr ews (B) and remo ve the control
panel (C).
4 - Remove the pipe (D).
5 - Remove the nozzle (E) and replace it with the
one suitable for the type of gas in use (see table
URNER PILOT LIGHT NOZZLE
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Access the pilot light through the opening pro-
vided in the bottom of the appliance.
3 - Unscrew the cap (B).
4 - Remove the nozzle (C) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
5 - Replace the cap (B).

REPLACING THE TOP BURNER PILOT LIGHT NOZZLE

A
at back of manual).
6 - Replace the pipe (D), the control panel (C) and
the control knobs (A).
B
C
- 29 -
D E
10
C
B
IDM-39618701900.tif
IT
GB
DE
FR
ES
IDM-39603623600.tif
English