Setting Up The Camera; Power On/Off - Angelcare AC417 Manual Del Proprietário

STEP 3 - SETTING UP THE CAMERA
3.1 - SELECT A LOCATION FOR THE CAMERA
Camera can be installed on the wall (see included parts) or using the tabletop stand. Depending on the position you
choose, you'll need to remove the metal ball from the stand to wall mount camera.
Note: Each time you power ON your Camera, the internal thermometer will need to calibrate to ensure
accuracy. This automatic process will take approximately 30 minutes. The colour changing temperature display,
by default, will be turned "OFF". You may turn this feature "ON" in the settings mode on your Parent Unit.
CAMERA
Front Side
6
Place the Camera
at least
3 feet [1 meter]
from the crib
1
2
Pause Sensor Pad/
Pairing button
Speaker
Microphone
Camera
Room
temperature
display
Micro USB
charging port
1) Place the Camera at a minimum
of 3 feet [1 meter] away from
the crib.
2) Connect the adaptor to the Camera
and into an electrical outlet.

POWER ON/OFF

Magnet for
tabletop stand and
Backside
wall mount