Before First Time Use; Setting Up The Camera - Angelcare AC-SP El Manual Del Propietario

8
4
WARNING
STRANGULATION HAZARD
• Remove all slack from Sensor Pad Cord.
• When lowering the mattress support
as your child grows, slide the vertical
Cord Cover downward so it remains
approximately in the center between
the mattress support and the floor. Slide
the Sensor Pad Cord through the Floor
Cover to eliminate any additional slack.
STEP 2 - SETTING UP THE CAMERA
Sensor Pad
OR
Sensor Pad
8
All manuals and user guides at all-guides.com
9
3
2
1
MUST BE MORE THAN
1 METRE AWAY
6
5
4 3 2
MUST BE MORE THAN
1 METRE AWAY
6
5
4 3 2
8) Remove any cord slack
to make sure no parts
of the cord are loose.
9) Peel off the double-
sided tape on the 4th
cord cover and place
it securely under the
cot leg.
• The Sensor Pad is not designed
for use with adults, children or infants
older than 24 months.
• Discontinue used of the Sensor Pad
when child is older than 24 months.
Remove Sensor Pad from cot and store
for future use.
• BEFORE FIRST TIME USE: To test
that the unit is ready for use, refer to
instruction manual on how to test that
the installation has been done correctly.
1) Install the Camera on
a flat, stable surface
facing the cot at a
distance of at least
1 metre and plug the
Sensor Pad cord into
1
the Camera.
2) Check to make sure
the Sensor Pad has not
moved from position.
3) Place the mattress
back inside the cot.
1