Turning On Your Monitor - Angelcare AC417 Manual Del Proprietário

STEP 4 - TURNING ON YOUR MONITOR
4.1 TURNING ON YOUR CAMERA
ON
OFF
1
4.2 TURNING ON YOUR PARENT UNIT
Your Camera and Parent Unit come pre-paired.
1
When Parent Unit is turned ON and Camera is OFF, Parent Unit will display
Out-of-Range icon.
If there is a lost connection between the two units after 15 seconds, the Out-of-Range alarm will sound on
the Parent Unit (refer to Troubleshooting section):
The Out-of-Range icon will appear on the screen and on the info bar.
•
INFO BAR IMPORTANT ICONS
Wireless Sensor Pad
Low Battery
Wireless Sensor Pad
Normal Status
Sensor Pad is
Paused
Sensor Pad Alert
Sensor Pad Lost
Link
1) Slide the Camera ON/OFF switch to the ON position.
1) Press and hold the Parent Unit ON/OFF button for
2 seconds until LCD screen is turned ON. Angelcare
shown for 1 second.
Camera displaying
image and sound
"TIC" icon
VOX icon
Fully charged battery (only appears when
Parent Unit is plugged in
The Camera connection signal strength
icon will appear in the status bar.
Reception
Quality icons
Temperature
alerts icons
68°F
Too Cold
Too Warm
Out-of-Range
's logo will be
®
Volume Level
icons
Battery Level
indicators
E
N
7